OIM-2FC Odd form Insert machine
OIM-2FC is anequipment of modularized design incorporated with odd compents,by integrating SMT into AI,it is able to achieve auto-inserting of all oddcomponents at high speed,adaptable to different co
OIM-2FC is anequipment of modularized design incorporated with odd compents,by integrating SMT into AI,it is able to achieve auto-inserting of all oddcomponents at high speed,adaptable to different co
| Specification | ||
Size(LxWxH) | 1550×1900×2100mm | |
Weight | 1750Kg | |
Operation System | Windows | |
No. Of Door | Single Side | |
Safety Grating (Door) | Standard Configuration | |
Air Supply*1 | 0.5-0.65 MPa (ANR) | |
Max Power | 6.6KW | |
Run Power*2 | 3.5KW | |
No. of Insertion Heads | 4 | |
Max Component Size | φ50 (35×35)mm | |
Component Height | ≤25mm | |
Component Feeding Type | Nozzle / Clamp | |
Speed*3 / Component | 2 S | |
Placement Accuracy CPK≥1.0 | ± 0.05mm | |
Insert Power | ≤29.4N | |
Insertion Direction | 0-360° | |
Insert Component Object | Connector,Switch,Socket Transformer Coils,Ports,Capacitors,Resistors,IC,Etc | |
PCB Size (LxW) | 70×70 ~ 450×400 mm | |
Carrier Size (LxW) | Max 500×550mm | |
PCB thickness | 0.6-2.0 mm | |
Conveyor Space (Upper/Lower) | 25 mm / 20 mm | |
Max. PCB Weight | 5 Kg | |
PCB included side width | ≥5mm | |
PCB Fixed Type | Sero / Cylinder clamping | |
Conveyor Type | Chain | |
Conveyor Adjusting | Auto | |
Conveyor Height | 900 ± 20mm | |
Lead Clinching Unit*4 | None | |
MES Connection*5 | Standard Configuration | |
Vision System | Mark CCD (Top) | 1 |
| Component CCD (Bottom) | 4 | |
Max Stations | 201 Radial Tape Feeder | 6 |
218 Radial Tape Feeder | 6 | |
207 Radial Tape 90° Feeder | 6 | |
259 Radial Tape Feeder | 12 | |
254 Radial Tape Feeder | 12 | |
202 Axial Tape Feeder | 6 | |
222 Tube Feeder | 12 | |
203 Tube Feeder | 6 | |
205 Bowl Feeder | 4 | |
Tray Feeder | 1 | |
Remark：If different types feeders mixed using, the num. of feeders are depended on combination. | ||
Statement:
* 1 Air should be atmospheric frost point: under -17℃, Power Particles: under 5μm, The highest Oil content: under 5mg/m3 . In addition, it need air when machine setup.
* 2 Changed by the using condition.
* 3 Depends on different components.
* 4 Lead clinching unit will replace the PCB supporting mechanism.
* 5 Only provided the original data format, the rest should be customized.
